HabaDRIVE Product Data Sheet
S-33/40

View this Data Sheet as PDF 
Product Designation
Product Group: Polyamide power transmission belts
Product Sub-Group: S-Tangential/flat belts
Main Industry Segments: Paper converting; Yarn processing
Belt Applications: Folder-gluer belt; Power transmission belt; Tangential belt
Special Features: Abrasion resistant; Forgiving in case of short term shock like overloads
Mode of Use/Conveyance: Power transmission
Product Design (enlarged)


Product Construction/Design
Friction cover/Pulley side (Material): Acrylonitrile-Butadiene-Rubber (NBR) as friction cover (pulley/cylinder side)
Friction cover/Pulley side (Surface structure): Rough structure
Friction cover/Pulley side (Color): Yellow
Traction Layer (Material): Polyamide (PA)
Reverse cover (Material): Acrylonitrile-Butadiene-Rubber (NBR) as friction cover (whirl side)
Reverse cover (Surface structure): Rough structure
Reverse cover (Color): Light green
Product Characteristics
Drive determination: Double-sided power transmission
Antistatically equipped: Yes
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
Thickness: 4.0 mm 0.16 in.
Mass of belt (belt weight): 4.3 kg/m2 0.88 lbs./sq.ft
Pulley diameter (minimum): 125 mm 5 in.
Pulley diameter minimum with counter flection: 125 mm 5 in.
Tensile force for 1% elongation (k1% after running in) per unit of width (Habasit standard SOP3-013): 13 N/mm 74 lbs./in.
Nominal peripheral force per unit of width: 37 N/mm 211 lbs./in.
Operating temperature admissible (continuous): Min -20
Max 100		 °C
°C		 Min -4
Max 212		 °F
°F
Seamless manufacturing width: 2400 mm 94 in.
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
Chemical Resistance Class: 2 (for details, see separate overview)
Remark: These indications are not guarantees of properties.
Resistant to: All solids; Dirt; Dryness; Fats; Humidity; Mildew; Oils
Limited resistance to: None
Not resistant to: Caustic Soda > 10%; Chlorinated hydrocarbons; Concentrated organic and inorganic acids; Cresols; Hydrochloric acid > 20%; Sulphuric acid > 20%
Calculations
With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to have belt drives calculated by Habasit representatives.
Installation and Handling Instructions
Do not go below initial elongation (epsilon) ~ 0.3%
Storage
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Joining System
Master Joining Method: Thermofix
Link to Joining Data Sheet

Limitations
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. 
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
* No calculation Value
3) CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal.
8) Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited
EEC European Economic Community
NA Not available
NAP Not applicable
Quality System (certified)
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide consistently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.

Certified Manufacturing Sites :
Habasit AG, Switzerland : Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987.
Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992
Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002.
Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001.
Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since 2006.
Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since 2006. 
Product Liability, Applications Considerations
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. 

Last modification on 07/28/2010