HabaDRIVE Product Data Sheet
TF-10

View this Data Sheet as PDF 
Product Designation
Product Group: Aramide power transmission belts
Product Sub-Group: TF-Tangential/flat belts
Main Industry Segments: Postal/mail sorting; Yarn processing
Belt Applications: Driving belt; Tangential belt
Special Features: Dimensionally stable; Energy saving; High modulus of elasticity; High uniformity of belt speed; Low initial tension
Mode of Use/Conveyance: Power transmission; Tangential drive
Product Design (enlarged)


Product Construction/Design
Friction cover/Pulley side (Material): Acrylonitrile-Butadiene-Rubber (NBR)
Friction cover/Pulley side (Surface structure): Fine textile structure
Friction cover/Pulley side (Color): Black
Traction Layer (Material): Aramide fabric
Reverse cover (Material): Acrylonitrile-Butadiene-Rubber (NBR) as friction cover (whirl side)
Reverse cover (Surface structure): Fine textile structure
Reverse cover (Color): Green
Product Characteristics
Drive determination: Double-sided power transmission
Antistatically equipped: Yes
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
Thickness: 1.7 mm 0.07 in.
Mass of belt (belt weight): 1.75 kg/m2 0.36 lbs./sq.ft
Pulley diameter (minimum): 25 mm 1 in.
Pulley diameter minimum with counter flection: 25 mm 1 in.
Tensile force for 1% elongation (k1% after running in) per unit of width (Habasit standard SOP3-013): 10 N/mm 57 lbs./in.
Nominal peripheral force per unit of width: 10 N/mm 57 lbs./in.
Operating temperature admissible (continuous): Min -20
Max 65		 °C
°C		 Min -4
Max 149		 °F
°F
Seamless manufacturing width: 1200 mm 47 in.
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
Chemical Resistance Class: 2 (for details, see separate overview)
Remark: These indications are not guarantees of properties.
Resistant to: Benzines; Dirt; Dryness; Fats; Humidity; Oils; Putrefaction; Softening agents
Limited resistance to: None
Not resistant to: Chlorinated hydrocarbons; Concentrated organic and inorganic acids; Cresols
Calculations
With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to have belt drives calculated by Habasit representatives.
Installation and Handling Instructions
Follow the Installing and Maintenance Instructions which are supplied with each product delivery.
Storage
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Joining System
Master Joining Method: Flexproof
10 x 120
Link to Joining Data Sheet

Limitations
Do not twist or fold belt; Do not force belt on pulleys; Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. 
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
* No calculation Value
3) CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal.
8) Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited
EEC European Economic Community
NAP Not applicable
Quality System (certified)
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide consistently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.

Certified Manufacturing Sites :
Habasit AG, Switzerland : Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987.
Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992
Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002.
Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001.
Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since 2006.
Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since 2006. 
Product Liability, Applications Considerations
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. 

Last modification on 02/25/2009