Joining Data Sheet
TCF-50H

Product Code: TCF-50H
Click here to open Product Data Sheet
Product Group: Polyester power transmission belts
Joining System: Flexproof

Important


Finger Cutting
Finger Cutting Device: AF-100 / AF-100US
Dimensions
Hot Pressing PF-61
Hot Pressing Device: PF-61
Settings
Belt/Tape Width Range: 0-35 mm
0-1.4 inch  		 35-50 mm
1.4-2 inch  		 50-60 mm
2-2.4 inch  		  
Pressing Temperature, Top: 180 °C
355 °F  		 180 °C
355 °F  		 180 °C
355 °F  		  
Pressing Temperature, Bottom: 180 °C
355 °F  		 180 °C
355 °F  		 180 °C
355 °F  		  
Pressing Time: 10 min   12 min   12 min    
Cooling Time: 10 min   12 min   12 min    
Inserts
  Top  
7 Heating plate; top
6 Covering plate (offset for easier removal)
5 Silicone paper dull (coated side down) or Teflon
4 Belt (conveying side up)
3 Silicone paper dull (coated side up) or Teflon
2 Guide rail (exactly centered in press)
1 Heating plate; bottom
  Bottom  
Pressing Remarks: REMARK: 0-35 mm / 1.4 in. belt width: use guide rails with narrow base plate.
REMARK: 35-50 mm / 1.4-2.0 in. belt width: use guide rails with wide base plate.
REMARK: 50-60 mm / 2.0-2.4 in. belt width: use guide rails with wide base plate.
REMARK: Cut strips of release media and insert in guide rail. For exactly matching belt width use covering plate of guide rail as a template.
Product Liability
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES.

Last modification on 08/17/2010